Grout for seams Weber.joint SIL 2 kg 414 granite
Weber.jointSIL is a high-quality, coloured tile grout with added silicone for grouting up to 6 mm deep in ceramic tiles, tiles, granite and natural stone. It is extremely durable and easy to use.
Technical characteristics:
• Manufacturer: Weber
Additional characteristics:
• Cement-based filling material with special polymers and silicone
• Suitable for joints up to ≤6 mm on walls and floors
• Antibacterial and easy to clean
• Working conditions: +5°C to +35°C
Instructions for use:
• Make sure that the ceramic or stone tiles are firmly attached and the adhesive is fully cured.
• The joints must be clean, dry and free of dust and debris.
• The surface must be free of oil, wax or other contaminants.
• Pour the dry mixture into a clean container.
• Add approximately 0.5–0.6 l of clean, cold water per kilogram.
• Mix with a low-speed mixer or by hand until you get a homogeneous, elastic mass.
• Let stand for 2–3 minutes and then mix well again.
• Fill the joints with a rubber spatula or a special tool in a diagonal motion so that the mixture penetrates completely.
• Remove excess mixture with a spatula, also in a diagonal motion, so that only the required amount remains in the joints.
• After the mixture has hardened slightly (approximately 15–30 minutes), lightly wipe the surface with a damp cloth.
• After drying, perform the final cleaning with a dry soft cloth.
Care and recommendations:
• Avoid loading the surface for at least 24 hours.
• Full hardening and commissioning is recommended after 7 days.
• Working temperature: from +5°C to +35°C.
Physical parameters:
• Weight: 2 kg
• Color: granite
* The manufacturer reserves the right to make changes in the characteristics, color, configuration and design of the product without warning. The store is not responsible for the changes made by the manufacturer.
No reviews found