Waterproofing resistant to chemicals Weber Dry Ultraflex T25 15+15 kg

Waterproofing resistant to chemicals Weber Dry Ultraflex T25 15+15 kg

Applicable against positive and negative water pressure. Provides highly effective waterproofing against ground moisture, temporary and permanent water pressure. Resistant to chemicals.

Specifications:

• Manufacturer: Weber

Additional characteristics:

• Consumption: 2.5-3 kg/m²

• Dilution: 1 : 1 (liquid : powder)

Instructions for use:

• The surface must be clean, free from dust, grease and other contaminants.

• All damaged or cracked areas must be repaired in advance with an appropriate plastering material and allowed to harden for at least 24 hours.

• Grooves and corner joints must be secured in advance with a special corner tape.

• Mix the components in an exact ratio of 1:1 (15 kg of powder and 15 kg of liquid component).

• Mix the mixture in a low-speed mixer for 2–3 minutes, then let it stand for about 5 minutes and mix again for 1 minute until a homogeneous mass is obtained.

Equipment:

• Component A

• Component B

Physical parameters:

• Weight: 15+15 kg

* The manufacturer reserves the right to make changes in the characteristics, color, configuration and design of the product without warning. The store is not responsible for the changes made by the manufacturer.