Waterproofing two-component elastic Weber.dry UV coat 30 kg

Waterproofing two-component elastic Weber.dry UV coat 30 kg

Weber.dry UV coat is used for waterproofing. It is resistant to ultraviolet rays, light pedestrian loads.

Specifications:
• Manufacturer: Weber

Additional characteristics:
• Density of the solution: 1.55 kg/dm³
• Adhesion to the substrate: ≥ 1.0 N/mm²

Surface preparation:

• The surface must be clean, slightly damp, smooth and firm

• Deep damage or holes must be repaired in advance (at least 24 hours in advance)

• Vertical and horizontal corners must be rounded to allow continuous movement of the waterproofing

• The concrete or cement surface must be slightly moistened, no puddles remain on the surface, only a light dampness

Application conditions:

• The working temperature must be between +5°C and +30°C

• Do not apply in excessively hot or humid weather

• Do not apply to frozen or frost-prone surfaces (within 24 hours)

Consumption and tools:

• Consumption: 3.0–3.5 kg/m² (for 2 mm thickness)

• Tools: hand mixer, brush, roller, squeegee

Application instructions:

• Mix 20 kg of powder with 10 kg of liquid component

• Mix at low speed for 2–3 minutes To obtain a homogeneous mass

• Let the mass stand for 2 minutes, then mix again

• Apply to the entire surface in at least 2 layers

• Apply each layer perpendicular to the previous layer

• Maintain a minimum interval of 5 hours between layers

Physical parameters:
• Weight: 10 + 20 kg

* The manufacturer reserves the right to make changes in the characteristics, color, configuration and design of the product without warning. The store is not responsible for the changes made by the manufacturer.