Eskaro Aquastop Hydro 2К is a two-component waterproofing for foundations, showers, basements, swimming pools, water tanks. It is used for cracks up to 2.5 mm.
Technical characteristics:
• Manufacturer: Eskaro
Additional characteristics:
• Consumption (minimum): 1.5 kg/1 m2
Purpose: • Two-component waterproofing material.
• Used to protect basements, foundations, bathrooms, balconies, and terraces from moisture and water exposure.
• Effective for both interior and exterior use.
Main Features:
• High adhesion to mineral surfaces (concrete, stone, cement).
• Waterproof: resists both positive and negative water pressure.
• Solvent-free.
• Forms an elastic coating that does not crack.
Surface Preparation:
• The surface must be dry, solid, and free of dust and grease.
• It is recommended to apply a primer (Eskaro Aquastop Primer) for better bonding.
Preparation Method:
• Before mixing, thoroughly shake both components.
• Pour component A (powder) into component B (liquid).
• Mix with a low-speed mechanical mixer for about 3 minutes until a homogeneous mass is obtained.
• Use the prepared mixture within 60 minutes.
Application Method:
• Apply to the surface with a firm brush or rubber spatula.
• Apply in 2–3 layers, with a minimum interval of 4 hours between each.
• Consumption per layer: approximately 1.5 kg/m².
• Full curing is achieved within 7 days.
Additional Recommendations:
• Do not work in rainy weather or under direct, intense sunlight.
• Immediately wash tools with water after use.
• Wear protective gloves and goggles during application.
Storage Conditions:
• Store in a dry, cool place at a temperature between +5°C and +25°C.
• Shelf life: 12 months in original sealed packaging.
Physical parameters:
• Weight: 20 kg (5+15)
* The manufacturer reserves the right to make changes in the characteristics, color, configuration and design of the product without warning. The store is not responsible for the changes made by the manufacturer.
No reviews found